Always look for this symbol of Authentic Urinator Products.
General Tips for Using The Urinator
1. Start With Warm Fluid to Conserve Your Batteries
We get a lot of questions about whether there is a Urinator for women. People seem to confuse the Urinator with The Whizzinator. The Urinator does not come with a prosthetic penis and it is designed to be used by both men and women. The Urinator is also not like other products on the market that use organic heat pads like the Clear Choice Incognito Belt or Testclear Urine Simulation with Powdered Urine kit. Both of those products use unreliable organic heat pads. Our product is a quality electronic device that stabilizes the temperature of the fluid to an exact 98 degrees.
General Tips for Using The Urinator
1. Start With Warm Fluid to Conserve Your Batteries
We get a lot of questions about whether there is a Urinator for women. People seem to confuse the Urinator with The Whizzinator. The Urinator does not come with a prosthetic penis and it is designed to be used by both men and women. The Urinator is also not like other products on the market that use organic heat pads like the Clear Choice Incognito Belt or Testclear Urine Simulation with Powdered Urine kit. Both of those products use unreliable organic heat pads. Our product is a quality electronic device that stabilizes the temperature of the fluid to an exact 98 degrees.
It is designed to maintain a urine sample (fake pee) at a specific temperature (around 98°F), which is the natural temperature of fresh warm urine when it leaves the body. If you start with fluid that’s already warm—close to body temperature—your Urinator won’t have to work as hard to keep it at the correct temperature. If you don’t plan on taking the test for a few hours you can always put fluid hotter than body temperature in the Urinator and it will not start using battery power until the temperature drops to 98 degrees. Your batteries must always be two 9-volt batteries and they MUST be Duracell brand
You can use The Urinator as a fake urine warmer or a urine heater. Just remember that if you have to heat the urine up. It will take more battery energy. So they won’t last as long. So starting with a warm sample to start with is always best practice.
Cold fluid requires more energy to heat up, which drains your batteries much faster. By starting with a warm sample, you reduce the strain on the batteries, allowing them to last longer. This is particularly helpful if you have a long wait before your test.
2. Always Use Duracell 9-Volt Batteries
Not all batteries are created equal. Duracell 9-volt batteries are known for providing a steady and consistent power output, which is essential for The Urinator’s functionality. The device needs a reliable power source to maintain the urine at the right temperature for an extended period.
Other battery brands, including Energizer, will not work. Duracell Copper Top batteries are absolutely a requirement because they provide a steady and reliable power output, ensuring the device keeps the sample at the correct temperature.
Always bring a backup set of Duracell batteries if you expect your test to last more than four hours. Fresh batteries provide peace of mind that the unit will maintain the correct temperature throughout your test.
3. Don’t Over-Tighten the Cap
The cap on the fluid bag is designed to keep the sample secure without allowing any leaks. However, tightening it too much can lead to issues. Over-tightening the cap makes it difficult to remove when needed.
The ideal fit is a snug one—just tight enough to prevent leaks, but loose enough that you can unscrew it easily when necessary. For extra guidance, you can watch the instructional video included with the device. The video will show you exactly how to tighten the cap properly and ensure you wrap the fabric pouch correctly to keep everything secure.
4. Understanding the Temperature Strip on the Original Urinator
The Urinator has an LCD temperature strip attached to the fluid bag. This strip is crucial because it shows the real-time temperature of your sample, ensuring that it’s within the acceptable range (usually 90°F to 100°F) for testing.
The strip shows three colors, each corresponding to different temperatures:
- 102°F – Brown
- 100°F – Green
- 98°F – Blue
It’s normal for the temperatures (102°F and 100°F) to show brown and green when the fluid is slightly above 98°F.
Don’t worry, it is not too hot!
The design of The Urinator gives you (plenty of time) about two to three minutes to pour the sample, replace the cap, and discreetly re-secure the device before the temperature starts to drop. This is enough time to complete your test without having to worry.
5. Choosing the Right Undergarments
The Urinator needs to stay secure during the test, and the right undergarments can help with this. Many users recommend stash briefs or tighty-whities because they fit snugly and hold the device in place, preventing it from shifting or moving during use. Women sometimes prefer placing the device in their bra for added discretion.
Whichever option you choose, the goal is to keep the device hidden and secure so that it doesn’t shift while you’re walking, sitting, or taking the test.
6. Practice Makes Perfect
Don’t wait until test day to familiarize yourself with The Urinator. Doing a practice run is essential for getting comfortable with how the device works. Use water for your practice runs so you can go through the entire process—from filling the bag to checking the temperature strip and pouring the sample. This will help you understand how quickly the fluid pours and what the temperature reading should look like.
If you can, practice with the batteries inserted and monitor the temperature strip to ensure it displays the correct readings. Practice runs also help you fine-tune your timing, so you’re not rushing when it matters most. When doing a practice run always pour your sample into a plastic cup, paper cup, so that you will get a correct reading. Do not use ceramic or glass as it will immediately drop the fluid temperature and give you a false reading of a low temperature.
7. Pro Tip: Secure the Cap with Dental Floss
It’s easy to accidentally drop the cap when handling the fluid bag, especially during a stressful moment. Some users have even dropped the cap into the toilet during a real test. To avoid this, you can attach dental floss to the cap.
By supergluing one end of the floss to the cap and tying the other end to the tube, you create a secure way to keep the cap from getting lost. If it slips out of your hand, it will stay attached to the device, and you won’t have to worry about fishing it out of a toilet or worse—being unable to retrieve it during the test.
Advanced Features of The Urinator BT (Patent Pending)
The Urinator BT has all the capabilities of the original model, plus Bluetooth technology for added convenience and control. Here’s how you can make the most out of the advanced features of the BT model:
1. Dual Functionality: Classic Mode
Even though the Urinator BT is Bluetooth-enabled, you can still use it in classic mode if you don’t have your phone or prefer manual operation. Just flip the Bluetooth switch off, and the device will function exactly like the original Urinator. This gives you flexibility depending on your situation.
For example, if you’re in a scenario where you don’t want to rely on your phone, you can use classic mode, knowing the device will still perform reliably.
2. Remote Monitoring and Control
One of the standout features of The Urinator BT is the ability to monitor and control the device remotely using your smartphone. After pairing the device with your phone, you can turn the heating pad off while keeping it in standby mode for up to 16 hours.
This allows you to wear the device discreetly throughout the day without worrying about the battery draining. When it’s time for your test, you can activate the heating pad using the app on your phone, and in about 20 minutes, when you feel the light vibration (optional in settings) from your phone you know when your sample is ready and at the correct temperature.
3. Customization for Discretion
For added discretion, you can set the device to vibrate when the sample reaches the desired temperature, so you won’t need to constantly check your phone. You will know it’s ready while its in your pocket. When this setting is chosen, your phone will slightly vibrate once every 3 minutes, letting you know the fluid is ready for the test.
- This feature is useful in situations where you don’t want to draw attention to yourself or your device.
- Additionally, for the really paranoid. You can rename the Bluetooth device through the app to something inconspicuous like “Medtronic 670F” (an insulin pump) , “St. Jude PM 1234” (a pacemaker), or HP 2070 printer.
- When this device is paired to your phone, it is invisible to everyone. However, if you ever lose paring with your phone. The Urinator device will go silent immediately, and not transmit any Bluetooth signal. Making it completely undetectable. This device has a truly invisible stealth mode.
- The only way to reconnect your phone to the device is to physically push the pairing button on the device. During this 5 second period, the device will be visible until it is paired with your Android phone. By naming it a medical device. In the unlikely event that anyone were to see that 1 to 5 seconds of transmission. You are protected by HIPAA regulations and cannot be questioned.
4. Pairing and Using the App
Pairing your Urinator BT with an Android phone is a straightforward process. You can download the BodyTemp98 app from the Google Play Store or directly from urinator.com. If you download it from the website, you’ll need to enable “allow apps from unknown sources” on your phone.
The app allows you to monitor the device in real-time, control the heating pad, and check the temperature of the sample. One particularly useful feature is that you can turn off the heating pad after pairing, and remain connected to your phone. The device is now in standby mode. When it’s time to use the device, you can remotely activate the heating pad using the App, and it will heat the sample within 20 minutes. This is incredibly convenient if you need to keep the device hidden until the last moment.
5. Pro Tip: for Extended Use
Another great feature of The Urinator BT is that you can connect it to your phone in the morning and turn the heating pad off, saving battery power while you carry the device discreetly for up to 16 hours. When you’re ready for the test, turn the heating pad back on through the app, and the sample will be heated to the correct temperature in about 20 minutes.
This means you can go about your day without constantly worrying about keeping the sample at the right temperature. When it’s time, just activate the heating pad remotely with your phone, and you’ll get an optional vibration notification when it’s ready.
Troubleshooting and Maintenance
1. Proper Care for Longevity
Taking care of The Urinator properly will ensure it lasts a long time—anywhere from 10 to 20 years. After each use, rinse the device with warm water to keep it clean and functioning properly. It’s also crucial to disconnect the batteries after use to avoid draining them unnecessarily.
Following these simple maintenance tips will help you keep your device in top shape for many years of use.
2. Pro Tip: How to properly disconnect the batteries.
When disconnecting the batteries always use a plastic ink pen to pry the battery terminals off of the batteries. Do not ever pull on the wires to disconnect them
Final Thoughts
Both The Urinator and The Urinator BT provide reliable solutions for job-related urine tests, helping you confidently manage your sample’s temperature. While the original model is simple and effective, the BT version adds modern conveniences like remote monitoring, vibrational alerts, and real-time temperature control.
By following these detailed tips and tricks, using the right batteries, and doing practice runs, you can ensure your experience is smooth and stress-free. And if you’re using the BT version, take advantage of the advanced features to keep everything discreet and under control.
Remember, preparation is key to success. Good luck, and stay cool!
